The Vykon® IO-34 is a compact direct I/O module for auxiliary monitoring and control when used with a JACE-2 or JACE-6 series controller (JACE-2/6), or other JACE® platforms as identified in their respective datasheets. This option expands the JACE by an additional 34 logic-controlled points. Included are 16 universal inputs, 10 form “A” (SPST) relay outputs, and 8 analog (voltage only) outputs. This greatly expands the JACE’s monitoring and control capabilities with fast, reliable, direct inputs and outputs for monitoring power, temperature, humidity, and status. In addition, the IO-34 provides power to the attached JACE, using either an externally-supplied 24Vac transformer or 24Vdc power supply. The on-board I/O can be used to monitor pulse contacts from power/demand meters, analog sensors, or transducers, as well as to control energy-consuming devices such as fans, lights, or pumps with digital relay outputs. Also included are eight analog outputs to proportionally control dampers, valves, and other devices. A maximum of one IO-34 module may be used per JACE. However, two (2) additional IO-16 modules can also be used, to provide a total of 32 UIs, 18 relay outputs, and 16 analog output points.
IO 34 (758.3 kB)