SFAR-1M

The SFAR-1M series of I/O modules is the generation of devices for the industrial automation and robotics. These devices are one of the smallest I/O modules available on the market with 1M enclosure size. There are 7 different types with the range of built-in I/O from 2 to 4, which makes these modules perfect solution for measuring a small number of signals at one point. Built-in RS485 interface allows to easy connection over Modbus RTU/ASCII protocol with a PLC makes the modules an external I/O. The use of 32-bit ARM core processor provides fast processing and communication with the baud rate from 2400 to 115200 bps. All the modules are equipped with a set of LEDs used to indicate the status of inputs and outputs useful for diagnostic purposes and helping to find errors. Built-in mini USB allows for initial configuration of the unit without power supply.

Key Features

  • 7 different types
  • Digital Inputs work as fast counters up to
  • 1 kHz
  • Version with FRAM memory for counters
  • Digital Inputs supports encoders
  • Analog Inputs measuring current or voltage
  • Temperature Inputs support the most popular sensor types: PT100, PT500, PT1000, NI100, KTY81-110 (2 and 3- wire)
  • Temperature Inputs support the most popular thermocouples types: J, K, T, N, S, R, B
  • Relay outputs up to 10 A
  • Analog Outputs operating as current or voltage
  • Modbus RTU/ASCII communication
  • Up to 128 modules on the bus
  • 1 kV galvanic isolated I/O
  • Built-in mini USB type B port for configuration

SFAR-S

The SFAR-S series of I/O modules is the generation of devices for the industrial automation and robotics. The characteristic feature of these modules is slim type of enclosure which needs very small space in the cabinet while offering up to 16 I/O. Built-in RS485 interface allows to easy connection over Modbus RTU/ASCII protocol with a PLC makes the modules an external I/O. The use of 32-bit ARM core processor provides fast processing and communication with the baud rate from 2400 to 115200 bps. All the modules are equipped with a set of LEDs used to indicate the status of inputs and outputs useful for diagnostic purposes and helping to find errors. Built-in mini USB allows for initial configuration of the unit without power supply. Dedicated IP module SFAR-S-ETH with Modbus TCP/IP to RS485 gateway, enabling use of SFAR-S series modules in the applications where the IP connectivity is required.

Key Features

  • 12 different types
  • Digital Inputs work as fast counters up to
  • 1 kHz
  • Version with FRAM memory for counters
  • Digital Inputs supports encoders
  • Analog Inputs measuring current or voltage
  • Temperature Inputs support the most popular sensor types: PT100, PT500, PT1000, NI100, KTY81-110 (2 and 3- wire)
  • Temperature Inputs support the most popular thermocouples types: J, K, T, N, S, R, B
  • Relay outputs up to 10 A
  • Analog Outputs operating as current or voltage
  • Modbus RTU/ASCII communication
  • Up to 128 modules on the bus
  • Dedicated TCP/IP gateway device SFAR-S-ETH
  • 1 kV galvanic isolated I/O
  • Built-in mini USB type B port for configuration