TP

Touch Point


*B/W: all panels are available in black or white, which is reflected in the last letter of the product code, e.g., TP-DISP-H-B or TP-C-W

The Touch Point is a modern comfort management wall panel with two most popular open communication protocols: Modbus RTU/ ASCII and BACnet MS/TP. The Touch Point is available in different configurations of sensors (temperature, CO2, and humidity), colors, and versions with or without display. The panel is equipped with an interactive TFT touchscreen, touch buttons, and glass panel. The panel can be configured using the iSMA Configurator software or Modbus registers/BACnet objects. It fits most of standard junction boxes in Europe and can easily be installed using a wall back box

Features

  • Modern and smart design
  • Intuitive management
  • Ease of installation and configuration
  • Multiprotocol interface
  • Ultimate flexibility
  • Free software: iSMA Tool & iSMA Configurator
  • Five touch function buttons
  • RS485 interface
  • Modbus RTU/ASCII and BACnet MS/TP
  • Temperature sensor as a standard, humidity and CO2 sensors as an option
  • USB type C interface
  • DIP switches for configuration
  • Buzzer
  • Navigation RGB LED

TP-VAV

Touch Point

*B/W: all panels are available in black or white, which is reflected in the last letter of product code, e.g., TP-VAV-H-DISP-B or TP-VAVA-C-DISP

The Touch Point VAV is a modern comfort management wall panel with two most popular open communication protocols: Modbus RTU/ASCII and BACnet MS/TP. The Touch Point VAV panel is available in different configurations of sensors (temperature, CO2, and humidity), colors, and touch buttons. The panel can be configured using the iSMA Configurator software or Modbus registers/ BACnet objects. It fits most of standard junction boxes in Europe and can easily be installed using a wall back box.

Features

  • Modern and smart design
  • Intuitive management
  • Ease of installation and configuration
  • Multiprotocol interface
  • Ultimate flexibility
  • Free software: iSMA Tool & iSMA Configurator
  • Three touch function buttons
  • RS485 interface
  • Modbus RTU/ASCII and BACnet MS/TP
  • Temperature sensor as a standard, humidity and CO2 sensors as an option
  • USB type C interface
  • DIP switches for configuration
  • Buzzer
  • Navigation RGB LED

CP

CONTROL POINT

Control Point wall panel with 2,6″ LCD display, available in 2 versions.

  • CP with buttons for navigation and temperature setpoint. Built-in temperature, and CO2 sensor.
  • CP-VAV buttons for navigation and temperature setpoint.

The panel has a built-in temperature sensor and, optionally, humidity and/or CO2 sensors. The Control Point panel is powered with 24 V AC/DC and has a built-in RS485 port (Modbus RTU/ASCII, BACnet MS/TP). The use of open communication protocols allows to connect the panel with any controller supporting Modbus RTU/ASCII or BACnet MS/TP. T

Ultimate Flexibility
16 hardware configurations. Control Point comes in white or black housing and has two versions of buttons, with or without fan control. Available with a set of temperature, CO2, and humidity sensors in different configurations. The CP-C and CP-VAV-C versions are equipped with a temperature and CO2 sensors.

Open Customization Over Network
Not only default values like temperature can be displayed but also alarms, blinds, and lightning thanks to the open network interface.

Multiprotocol Integration
Factory-equipped with the two most popular open-communication protocols, Modbus and BACnet.

Plug & Play Comfort Management Solutions
Combined with iSMA CONTROLLI zone controllers, it is ready to be used out of the box, reducing engineering costs.

Seamless Configuration
Control Point offers effortless configuration using network protocols or free-of-charge software using built-in USB-C port.

LP / LP-1

LP is a wall panels with 2.3” LCD display and four function buttons. Additionally, the panel has the built-in temperature sensor and optionally the humidity and CO2 sensors. iSMA-B-LP is powered with 24 V AC/DC and has the built-in RS485 port (Modbus RTU/ASCII, BACnet MSTP). Use of open communication protocol allows to connect the panel with any controller supports Modbus RTU/ASCII or BACnet MSTP. Together with FCU controller, the panel allows to change the basic parameters such as: temperature setpoint, fan speed, FCU mode and others. Thanks to built-in USB port, there is possibility to firmware update and panel configuration without the necessity of power supply. iSMA-B-LP has the modern design and is available in different colours (white is basic) on client request and also in two versions of button icons appearance.

Key Features

  • 2.3” LCD display with backlight
  • 4x function buttons
  • Built-in temperature, CO2 and humidity sensors
  • Wall mounting (standard electric box – 60 mm)
  • Changing of the basic parameters in connection with FCU controller
  • Modbus RTU/ASCII
  • BACnet MSTP
  • 2x RJ12 for fast connection to FCU controller
  • 7 main menu categories
  • Over 100 variables freely to use
  • Possibility to display time

LP

LP1

SP

SP is wall panel with a potentiometer and one function button. Additionally, the panel has the built-in temperature sensor. We design this device for those who are looking for a low-cost and simple solution and don’t want to pay for features they won’t use. Compact size and clear style/design is friendly to architects and building owners. This device is ready to use with FCU controllers without a need of any configuration. In connection to them the panel allows to change the basic parameters such as: temperature setpoint or FCU controller working mode. The actual status of this last parameter is indicated by the built-in LED diode. In effect, these two devices create a cost-effective solution for comfort and energy saving.

Key Features

  • Built-in temperature sensor for its precise monitoring
  • 1x function push button e.g. for occupancy mode activation
  • Simple and easy-to-use setpoint adjustment method
  • Small size of housing
  • Universal visual design fits into many applications
  • Surface mounting (with or without the use of standard electric box – 60 mm)
  • Changing of the basic parameters in connection to FCU controllers without any additional configuration